"Danfoss EPR Valve KVP35 13/8"
Item Number:
034L0032
| Max Operating Pressure : | 18.0 Bar |
|---|---|
| Product Group : | Pressure Reg - Danfoss |
| Refrigerant : | R22, R134a, R404A, R407A, R407C, R407F, R407H, R422B, R422D, R448A, R449A, R449B, R450A, R452A, R454A, R454C, R455A, R507A, R513A, R515B, R516A |
General Information
| Approval : | C UL US LISTED, EAC, LLC CDC TYSK, RoHS, RoHS China |
|---|---|
| CV Value : | 9.250 gal/min |
| Equipment : | Schrader valve access port |
| Product Group : | Pressure Reg - Danfoss |
| Type : | KVP 35 |
Additional Info
| Additional Info : | Max. extern.bellow press.25bar |
|---|---|
| Family : | KVP |
Capacity R134a
| R134a Capacity : | 6.10 kW |
|---|
Capacity R22
| R22 Capacity : | 8.60 kW |
|---|
Capacity R407C
| R407C Capacity : | 7.90 kW |
|---|
Connections
| Connection Size : | 1 3/8" |
|---|---|
| Connection Type : | Solder, ODF |
| Inlet Connection Size : | 1 3/8 in, 35.00 mm |
| Inlet Type : | Solder, ODF |
| Outlet Connection Size : | 1 3/8 in, 35.00 mm |
| Outlet Type : | Solder, ODF |
Kv Values
| Kv Value : | 8.000 m³/h |
|---|
Logistical Information
| Commodity Code : | 84818059 |
|---|---|
| Country Of Origin : | POL |
| EAN : | 5702428411790 |
| Gross Weight : | 1.038 kg |
Measurements
| Net Weight : | 0.9 kg |
|---|---|
| Weight : | 0.90 kg |
Pressure
| Max Operating Pressure : | 18.0 Bar |
|---|---|
| Regulating Range : | 0.0-5.5 Bar |
| Test Pressure : | 19.8 Bar |
Refrigerant
| Refrigerant : | R22, R134a, R404A, R407A, R407C, R407F, R407H, R422B, R422D, R448A, R449A, R449B, R450A, R452A, R454A, R454C, R455A, R507A, R513A, R515B, R516A |
|---|
Temperature
| Factory Setting : | 2.00 Bar |
|---|---|
| Max Temperature : | 130 °C |
| Medium Temperature Range : | -45-130 °C |
| Min Temperature : | -45 °C |
Valves
| Flow Direction Indicator : | Engraved 1-way arrow |
|---|
Product information
The KVP is mounted in the suction line after the evaporator and is used to:
- Maintain a constant evaporating pressure and thereby a constant surface temperature on the evaporator. The regulation is modulating. By throttling in the suction line, the amount of refrigerant gas is matched to the evaporator load.
- Protect against an evaporating pressure that is too low (e.g. as protection against freezing in a water chiller). The regulator closes when the pressure in the evaporator falls below the set value.
- Differentiate between the evaporating pressures in two or more evaporators in systems with one compressor
| File name | Extension | Size |
|---|---|---|
| Technical literature | 1.05 MB | |
| Installation Manual | 283.65 KB | |
| Conformity Declaration | 1.04 MB | |
| Conformity Declaration | 2.02 MB |